Origin

China

1.May renovate the mechanical weaving looms to electronic ones,which allows to expand the variety and range of the fabric-weaving and upgrade the output and quality of the fabrics.
2.The measured length weft is wupplied to the loom by means of the system
3.Low tension weft pre-wind
4.Vibration winding drum,simpty by changing the diameter of weft starage durm
5.Simple S/Z ratationwise shiffing function
6.Yarn separation is continuously adjustable. Maximum to 2.2 mm
7.Photocell is used to control the number of coils to on the spoil body of the feeder and detect the breakage weft, if could send signal to stop the loom when weft breakage.
 
Technical specification
 
Spec/Model                             ZLCW30
Applicable machine type      Airjet and waterjet looms
Weft                         Filament yarn,Staple fibre
Yarn count range             6Nm---20dtex
Weft feeding speed           With pattern>=2400m/min.
                             Without pattern >=1600 m/min
S/Z Rotate direction         S/Z shiftable
Yarm storage control         Adustable yarn separation from
                             0.7 to 2.2mm
Weft breakage control
loom stop function           Yes
Weft brake device            Optional configuration